Ofmega Sintesi pedals are used for the Mistral group set for road bikes.
No the most beautiful, but more or less in line with the design of the derailleurs.
Some kind of "aero" and adjustable toe clips.
Ofmega Mistral front derailleur braze-on type
Some new Ofmega Mistral parts to complete the Mistral group set for my road bike project.
I already have all shifting components and a crank set.
Because I'm considering a frame set with a braze-on fitting for the front derailleur, I had to look for another front deraileur. and this was not so easy to find.
But thanks to good friend, here it is!
I already have all shifting components and a crank set.
Because I'm considering a frame set with a braze-on fitting for the front derailleur, I had to look for another front deraileur. and this was not so easy to find.
But thanks to good friend, here it is!
Diadora shoes for Power Drive pedals
When you’re a collector of pedals systems from the 1970s, 80s and 90s, of course you want the Diadora Power Drive pedals. Not, because these are so good or valuable, but just to complete your collection. Pretty rare, so you can be satisfied if you’ve managed to get a nice pair (or even 2). Yes, the pedals are quite rare, the cleats belonging to these pedals are even more difficult to find. But all of this stuff is really worthless if you don’t have the proprietry Diadora Power Drive shoes.
Of course a special hole pattern for the Power Drive cleats, redundant slotted cleats, a fancy string system with a knob to tighten the shoe... Soon I will find out how it all works (or not).
Of course a special hole pattern for the Power Drive cleats, redundant slotted cleats, a fancy string system with a knob to tighten the shoe... Soon I will find out how it all works (or not).
SOLD: Track frame kit with Zeus parts
SOLD: Track frame kit, Zeus fork crown and dropouts
Frame size 59.5 cm center - top.
Manufacturer unknown, most probably Belgian.
Top tube approx. 55 cm center - center.
Takes a 27.0 mm seat post.
Zeus dropouts and fork crown.
Usage and storage damage, repainted, but not very nice.
Frame size 59.5 cm center - top.
Manufacturer unknown, most probably Belgian.
Top tube approx. 55 cm center - center.
Takes a 27.0 mm seat post.
Zeus dropouts and fork crown.
Usage and storage damage, repainted, but not very nice.
Zeus track crank set
Another not every day rendez-vous: Zeus Criterium Pista track crank set.
Will be a long shot to collect other Zeus parts and a matching frame.
165 mm cranks with typical (odd) Zeus 119 (?) mm BCD
3/32" chain ring 53T.
Will be a long shot to collect other Zeus parts and a matching frame.
165 mm cranks with typical (odd) Zeus 119 (?) mm BCD
3/32" chain ring 53T.
Ofmega Mistral shifting components
Nice set of shifting components: Ofmega Mistral.
No idea about quality and function, but at least it's different.
To be completed with other Mistral parts and Modolo (?) brakes.
No idea about quality and function, but at least it's different.
To be completed with other Mistral parts and Modolo (?) brakes.
Ofmega Mistral group set
Ofmega Mistral: not the most common group set.
Actually, it's not a complete group set, but a few components and completed with some parts from other (CX, Super Competizione) series.
Very eye catching are the crank set and the (composite) rear derailleur and shifting levers.
Note that not all "Mistral" parts are on the group set photo below.
There are also high flange track hubs and track pedals.
This track crank set is 165 mm long and the 5 mm spider and chain ring have a BCD of 144 mm.
The 52T chain ring is narrow, designed for 1/2x3/32" chains.
Actually, it's not a complete group set, but a few components and completed with some parts from other (CX, Super Competizione) series.
Very eye catching are the crank set and the (composite) rear derailleur and shifting levers.
Note that not all "Mistral" parts are on the group set photo below.
There are also high flange track hubs and track pedals.
This track crank set is 165 mm long and the 5 mm spider and chain ring have a BCD of 144 mm.
The 52T chain ring is narrow, designed for 1/2x3/32" chains.
Campagnolo Electa saddle
Something you ould never buy to ride. Heavy, totally over-engineered, ridiculous, expensive.
But a must have for a collector.
So, here it is: Campagnolo Electa pneumatic saddle. Complete with box, bag, pump and instruction leaflet.
Not even developped by Campagnolo. The technology and manufacturing is by Fugazzi (check: Air Dea saddle), but of course, the Campagnolo logo makes it really hot and desirable, although a Fugazzi is even more rare.
The bladder, which can be maintained and even replaced (but where the hell would you find spares?) when the leather cover is removed, can be inflated with a dedicated pump to a very low pressure of 0.4 - 1.2 bar, which equals 4 to 8 time squeezing the "inflator". This depends on the rider's weight and preference.
But a must have for a collector.
So, here it is: Campagnolo Electa pneumatic saddle. Complete with box, bag, pump and instruction leaflet.
Not even developped by Campagnolo. The technology and manufacturing is by Fugazzi (check: Air Dea saddle), but of course, the Campagnolo logo makes it really hot and desirable, although a Fugazzi is even more rare.
The bladder, which can be maintained and even replaced (but where the hell would you find spares?) when the leather cover is removed, can be inflated with a dedicated pump to a very low pressure of 0.4 - 1.2 bar, which equals 4 to 8 time squeezing the "inflator". This depends on the rider's weight and preference.
Gazelle track, Shimano Dura Ace 10 mm pitch
I bought this Gazelle track frame, 55 cm, for my 2nd Shimano Dura Ace 10 mm pitch group set.
Unfortunately, the geometry is a bit strange (very shallow seat tube angle, long top tube) and too old for both my taste and for the group set. Frame kit is approx. 1968, while the group set is approx. 10 years newer.
Not a great combination, not ridable for my or my son, so I took it apart again.
Here's a full spec.
Frame and fork: Gazelle track, Reynolds 531, 55 cm centre - top
Headset: Hatta Swan
Cranks: Shimano Dura Ace 10, FC-7000, 1xx mm, xx T / xx T
Bottom Bracket set: Shimano Dura Ace track, BB-7500, BC thread, 107 mm axle length
Hubs: Shimano Dura Ace 10, HB-7020, 36 H front, 32 H rear
Rims: Nisi Corsa Stretto tubular, dark grey anodised, 36 H front, 32 H rear
Spokes: DT Swiss Competition, 2.0 - 1.8 mm, silver
Tyres: Vittoria Corsa CX tubular
Sprocket: Shimano Dura Ace 10, SS-7000, BC33 x 24 TPI threading for special Dura Ace 10 hub only, xx T
Chain: Shimano Dura Ace 10, CN-7000
Pedals: Kyokuto (KKT) Pro Ace Track
Toe clips: MKS steel, chrome plated, size L
Toe straps: Alfredo Binda
Saddle: Ariake Jaguar II
Seat Post: Suntour Superbe, 27.2 mm
Stem: Cinelli 1A, xx cm
Handlebars: Cinelli Criterium No. 65, xx cm centre - centre
Bar tape: Ambrosio Ribbon white
Unfortunately, the geometry is a bit strange (very shallow seat tube angle, long top tube) and too old for both my taste and for the group set. Frame kit is approx. 1968, while the group set is approx. 10 years newer.
Not a great combination, not ridable for my or my son, so I took it apart again.
Here's a full spec.
Frame and fork: Gazelle track, Reynolds 531, 55 cm centre - top
Headset: Hatta Swan
Cranks: Shimano Dura Ace 10, FC-7000, 1xx mm, xx T / xx T
Bottom Bracket set: Shimano Dura Ace track, BB-7500, BC thread, 107 mm axle length
Hubs: Shimano Dura Ace 10, HB-7020, 36 H front, 32 H rear
Rims: Nisi Corsa Stretto tubular, dark grey anodised, 36 H front, 32 H rear
Spokes: DT Swiss Competition, 2.0 - 1.8 mm, silver
Tyres: Vittoria Corsa CX tubular
Sprocket: Shimano Dura Ace 10, SS-7000, BC33 x 24 TPI threading for special Dura Ace 10 hub only, xx T
Chain: Shimano Dura Ace 10, CN-7000
Pedals: Kyokuto (KKT) Pro Ace Track
Toe clips: MKS steel, chrome plated, size L
Toe straps: Alfredo Binda
Saddle: Ariake Jaguar II
Seat Post: Suntour Superbe, 27.2 mm
Stem: Cinelli 1A, xx cm
Handlebars: Cinelli Criterium No. 65, xx cm centre - centre
Bar tape: Ambrosio Ribbon white
Cinelli Volare SLX
Cinelli Volare SLX is a very nice saddle, rare, very much sought after.
The original is from the 1980s, but a remake is still sold.
Comfort-wise not my personal favourite.
There are several versions available, al the same shape, same padding, but different styles of leather.
Smoothe leather, suede, perforated, ...
In the 1980s, not many of these saddles were sold and used, which makes these saddles rare now.
What makes the Volare SLX so wanted nowadays is unclear. Same as for the Maestro. Well known name, pretty rare.
I got this saddle in pre-used condition, red textured suede. I hate red and differently coloured saddles and because this one was also a bit worn, I decided to dye it black. Easier and more nice with smooth leather than with suede.
The original is from the 1980s, but a remake is still sold.
Comfort-wise not my personal favourite.
There are several versions available, al the same shape, same padding, but different styles of leather.
Smoothe leather, suede, perforated, ...
In the 1980s, not many of these saddles were sold and used, which makes these saddles rare now.
What makes the Volare SLX so wanted nowadays is unclear. Same as for the Maestro. Well known name, pretty rare.
I got this saddle in pre-used condition, red textured suede. I hate red and differently coloured saddles and because this one was also a bit worn, I decided to dye it black. Easier and more nice with smooth leather than with suede.
Subscribe to:
Posts (Atom)


























